Start-charging equipment Vulkan CD-1000

Description start-charging equipment Vulkan CD-1000

Vulkan CD-1000 is a powerful professional starter and charger designed for charging batteries and starting the engine. It can be installed at service stations, taxi fleets, vehicle fleets of large transport companies, etc. Suitable for most types of batteries. It can be used to charge and launch both small cars and SUVs, as well as heavy equipment, including tractors, combines, excavators, etc.

This is a transformer device that is powered by a 3-phase network with a voltage of 380 volts. The body is robust from steel, has a handle and large wheels for easy transport. Copper winding, which favorably affects the life of the unit.

Features of the starter-charger

Operating modes

There are special switches on the front panel, it is extremely simple to control the operation of the device. The device operates in two modes, starting and charging. In the first case, the unit delivers a current with a maximum strength of up to 1000A. You can charge batteries with a capacity of 45 to 1000 Ah.

Boost Charge

Fast charging mode can be used when it is necessary to revive a dead battery as quickly as possible. To do this, select the desired function on the control panel and set the time. On average, 15 minutes will be enough for the battery to receive enough charge to start the engine. The timer turns off the system automatically.

Operating voltage 12/24 Volts

This device is suitable for working with rechargeable batteries with an operating voltage of 12 and 24 V. That is, you can connect 1 or 2 standard 12-volt power supplies to it. In this case, the power will be 2000/4000 W.

High level of protection

The device has several protection systems that protect it during operation from such troubles as overload, short circuit and overheating. It also provides additional protection against incorrect polarity when connected.

Display

Due to the fact that the charger has an ammeter, it is easy to follow the work process. The front panel has a special analog indicator by which you can monitor the current strength, this is important to prevent overloading.