Drill driver Vitals Us 1030MG

Description drill driver Vitals Us 1030MG

More efficiency when drilling different surfaces

The Vitals Us 1030MG drill/driver has a modern design, increased efficiency, operational reliability and ease of maintenance. This hand held power tool is used when:

1. Unscrewing or tightening fasteners – dowels, nuts and bolts, screws, confirmations, self-tapping screws, screws.

2. Drilling holes with drills with a cylindrical shank with a diameter of up to 10mm.

In the case of twisting or unscrewing the fasteners, special bits are used. For nuts and bolts, nozzles with the required profile are used.

Among the important features of this model, the presence of illumination of the working area is distinguished, for greater convenience when working with a drill, in case of insufficient lighting. In addition, there is a spindle speed control, which allows for better and more efficient work.

Principle of operation

In work, the drill-screwdriver is as simple as possible, by pressing the «On/Off» button, if it is unlocked, the rotary movement to the gearbox is directed from the rotor. Further, the torque is transmitted to the spindle, on which a chuck with a nozzle, drill or bit is fixed.

The main difference between a screwdriver and a drill is the presence of a torque regulator clutch. With its help, twisting is carried out with the required effort, and the splines are not grinded, the thread does not break. When the fastener is tightened, the rotation of the chuck is suspended, and the rotor of the electric motor continues to rotate.

The advantage of using battery models is their mobility and independence from a stationary power source. An important point is also the ability to avoid electric shock during work.

Powerful electric motor

This model is equipped with a powerful electric motor, which ensures high-quality and long-term operation of the device. And the ability to lock the «On/Off» button makes the device more secure.

Speed ??regulation

The presence of built-in electronics makes it possible to adjust the rotation speed of the chuck using a drill as a screwdriver. Increasing or decreasing the pressure on the Start button will decrease or increase the rotation speed.

Keyless chuck

The keyless chuck is made of metal, it is made of a fixing component for equipping. To carry out work, you need to insert the equipment into the cartridge and scroll to a clattering sound. After that, you can start working with the drill.

Rubberized handle

The drill is equipped with a main and additional handle with rubberized elements. This design provides comfort when working with the equipment.

Complete set:

— Drill driver Vitals Us 1030MG.

— Carbon brushes.

— Manual.