AV receiver Marantz NR1711 Black

Description aV receiver Marantz NR1711 Black

Specifications Marantz NR1711

• The number of channels: 7.2
• Seven high-current discrete amplifiers
• Output Power:
  • 50 watts per channel (8 Ohms, 20 Hz – 20 kHz SOI: 0.08%, 2 channels are active)
  • 70 watts per channel (6 ohms, 1 kHz, CED: 0.7%, 2 channels are active)
  • 90 watts per channel (6 ohms, 1 kHz, THD 1%, 1 channel is active)
  • 100 watts per channel (6 ohms, 1 kHz, CED: 10%, channel 1 is active)
• Input sensitivity:
  • 130 mV (analog line input)
  • 2,5 mV (MM-fonokorrektor)
• Frequency range: 10 Hz – 100 kHz (+ 1, - 3 dB, Direct mode, the analog connectors)
• Signal/noise: 98 dB (analog line interface, Direct Mode)
• AM/FM-tuner  
• Built-in decoders (basic):
  • DTS: X (to 5.1.2), DTS Neural: X, DTS Virtual: X, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Digital Surround, DTS 96/24, DTS Express
  • Dolby Atmos (to 5.1.2), Dolby Atmos Height Virtualization Technology, Dolby Digital Plus, Dolby TrueHD, Dolby Surround
• modes: Pure Direct, Direct  
• Support for wireless multi-network: HEOS
• Supported audio formats (LAN and USB):
  • MP3, WMA, AAC, FLAC, FLAC HD (24-bit/192 kHz)
  • ALAC (24-bit/192 kHz), WAV (24-bit/192 kHz), DSD (5.6 MHz)
• uluchshayzer compressed audio: MDAX2
• Play mode without pauses (gapless) for: FLAC, WAV, ALAC, DSD
• Supported Web services: TuneIn, Spotify Connect, Tidal, Deezer, Amazon Prime Music, etc.
.
• Network Streaming Audio: Supports
• Auto Calibration speaker system: Audyssey MultEQ
• Technology Audyssey Dynamic EQ/Dynamic Volume: supported
• Support Audyssey MultEQ Editor App paid app for finer adjustment of calibration settings Speaker: there
• ISF Certification for prof. video calibration: there
• Modes ISF (day)/ISF (night): there
• Support for Wi-Fi IEEE 802.11a/b/g/n, 2,4/5 GHz
• Support for Bluetooth version 4.1, a maximum range of up to 30 m
• Support for AirPlay/AirPlay 2  
• Support 8K, 4K (50/60 Hz, 4: 4: 4 Pure Color)
• Through a pass signal:
  • via HDMI in StandBy   mode;
  • Signal in the 8K-resolution  
  • 3D-video  
• Control via Marantz AVR Remote application through devices based on iOS, Android and Amazon Kindle Fire tablet: yes
• Management of IP-address: yes
• Voice Control is supported by:
  • Amazon Alexa
  • Google Assistant
  • Apple Siri
• Setup System Setup Assistant  
• The number of additional zones 1
• Inputs:
  • 6, x HDMI (8K, HDCP 2.3, HDR10, Dolby Vision, HLG, BT.2020)
  • 3 x composite
  • 2 x component
  • 3 x linear RCA
  • 1 x MM-phono input (RCA)
  • 1 x coaxial
  • 1 x optical
  • 1 x USB for external storage (on the front panel)
  • 1 x LAN-interface RJ45
• Outputs:
  • 1 x HDMI (8K, HDCP 2.3, ARC, eARC, CEC)
  • 1 x Composite
  • 1 x Component
  • 1 x 2.2-Channel Pre Out (RCA)
  • 1 x Pre Out (RCA) for Zone 2
  • 1 x 6.3 mm audio jack
• Other Capabilities:
  • 1 x 3.5 mm for the calibration microphone
  • x 2 system bus connector
  • 1 x trigger output (12)
  • x 1 slot AM/FM-antenna
  • 2 x slots for Wi-Fi/Bluetooth-antennas
  • 1 x grounding terminal
• Support for automatic playing ALLM (Auto Low Latency Mode) mode with low latency for consoles Xbox One
• Support for CEC control protocol to work with the Smart TV Yes
• AC terminals for 7 pairs of screw terminals color coded (4 – 16 ohms)
• Power consumption 250 W, standby: 0,2 W
• Power consumption in idle mode without sound 30 W (eco mode), 40W (without Eco-mode)
• The remote control: RC035SR
• Dimensions (W x H x D): 440 x 105 x 368 mm
• Weight: 8.4 kg