Keep the chargeSpecifications
| Brand | ACOUSTICS |
| Trade name | Alumat Profy A3 |
| Type | vibration absorption material |
| Length | 700 mm |
| Width | 500 mm |
| Height | 3 mm |
| Applying for | chuck guard, floor, wheelarch, doors, roof, rear shelf, trunk |
| MLI | 0,45 |
| Noise absorption | vibration |
| Manufacturer | Ukraine |
| Price per | sheet |
Bought with this product
Terms of payment
You can buy vibro-isolation ACOUSTICS Alumat Profy A3 in Kyiv and other cities (courier delivery around the city and Ukraine). Possible cashless payment, online payment by credit card Visa / MasterCard or payment for order upon receipt.
Authorized Dealer
Description vibro-isolation ACOUSTICS Alumat Profy A3
Acoustics Alumat PROFY A3 vibration isolation material is a composition based on rubbers and additives, covered with aluminum foil 100 microns thick. The thickness of the mastic layer is 3 mm. This material has good adhesion, high mechanical loss coefficient of 0.20 units and low weight. It is easily fixed even on difficult surfaces without the need for heating. This material allows you to effectively minimize the level of noise and vibration in the vehicle interior.
It is suitable for processing the most vibration-loaded areas of the cabin. It can be applied to surfaces by overlapping, which will increase its effectiveness. The material can be used in a wide temperature range. To achieve good results, it is recommended to cover at least 70% of the working surface of the car with this material.
Sheet thickness
The sheet of anti-vibration material has a thickness of 3 mm and a size of 70x50 cm. It is quite flexible and durable, which makes it easy to install even on very uneven surfaces.
Operating temperature
This vibration isolation material can be used in a wide temperature range from -45 to +150 degrees.
Adhesive coating
On the inside of the material there is a bituminous composition with an adhesive layer, which makes it easy to apply the material on uneven surfaces. It has high adhesion, which ensures reliable adhesion and durability during operation.
Need for heating
Preheating is not required for mounting this material. The installation temperature is in the range from +10 to +30 degrees.
Scope of use
This material is widely used as vibration isolation in various areas of the car interior, such as wheel arches, floor, bulkhead in the engine compartment and the bottom of the trunk.
Vibration isolation: Best Sellers
Similar products
