Vibro-isolation

Car vibration isolation is the process of installing special materials on the car body to reduce vibrations and noise from the engine, road and other sources.

Vibration isolation increases interior comfort by reducing noise and vibration, improving acoustics, and also protects against corrosion.

Yes, you can, but it is recommended that you contact professionals for the best results.

Typically, vibration isolation is applied to the doors, floor, roof, hood, trunk and wheel arches.

Yes, vibration isolation increases the weight of the car, but it is usually a minor increase that does not affect its performance.

Yes, vibration isolation and noise isolation are often used together to maximize the effect of noise and vibration reduction.

Vibration isolation does not require regular renewal if it has been installed properly. Materials retain their properties throughout the life of the car.

Vibration isolation improves acoustics by reducing vibrations and extraneous noise, allowing the sound system to work more efficiently.

Yes, quality vibration isolation materials retain their properties even in extreme temperature conditions, including winter conditions.

The effect of vibration isolation on fuel efficiency is minimal and hardly noticeable.

For doors, 2-3 mm thick vibration isolators and 5-8 mm thick noise-absorbing materials such as bituminous mats and acoustic foam are suitable.

For the floor, dense 3-4 mm thick vibration isolators and 10-15 mm thick noise-absorbing materials such as butyl mats and multi-layer coatings are recommended.

For the roof, lightweight 2 mm thick vibration isolators and 5-10 mm thick noise-reducing materials such as acoustic foam and polyethylene foam are suitable.

For the wheel arches, use 4-6 mm thick materials resistant to moisture and dirt, such as vibration plastics and noise-absorbing mats.

For the trunk are suitable dense vibration insulators with a thickness of 3-4 mm and sound-absorbing materials with a thickness of 10-15 mm, such as bituminous mats and acoustic mats.

For engine noise insulation, heat- and noise-absorbing materials 10-15 mm thick such as polyurethane foam covers and special hoods are used.

For the hood, heat-insulating materials with a thickness of 8-10 mm are used, which also have noise-absorbing properties.

For the torpedo, thin sound-absorbing materials with a thickness of 5-8 mm, such as acoustic foam and polyethylene foam, are suitable.

For the ceiling, use lightweight vibration isolators with a thickness of 2 mm and noise-absorbing materials with a thickness of 5-10 mm, such as acoustic foam and foil mats.

Choose materials according to their thickness and the type of noise to be eliminated. It is recommended to use multi-layer combinations of vibration and noise absorbing materials to maximize the effect.

Vibro-isolation ACOUSTICS Xtreme X2 — 216 UAH

Vibro-isolation ACOUSTICS Electro 2.5 (70 sm x 50 sm) — 217 UAH

Vibro-isolation ACOUSTICS MultiMat PRO 5,5 mm (37 sm x 50 sm) — 186 UAH

Vibro-isolation ACOUSTICS Electro 1.5 (70 sm x 50 sm) — 277 UAH

Vibro-isolation ACOUSTICS Alumat 3 — 193 UAH

Vibro-isolation Vibrex Black Label - Business Line 3 (50 sm x 400 sm) — 1 742 UAH

Vibro-isolation Vibrex Red Label - Premium Line 2 (50 sm x 400 sm) — 1 716 UAH

Vibro-isolation Vibrex Black Label - Business Line 2 (50 sm x 400 sm) — 1 458 UAH

Vibro-isolation Vibrex Master 3 (50 sm x 400 sm) — 1 153 UAH

Vibro-isolation Vibrex Master 2 (50 sm x 400 sm) — 980 UAH

Vibro-isolation Vibrex Master 1.6 (35 sm x 50 sm) — 84 UAH

Vibro-isolation ACOUSTICS Block PRO 2 mm (37 sm x 50 sm) — 85 UAH

Vibro-isolation Vizol 1,3 60 um (70 cm x 50 cm) — 85 UAH

Vibro-isolation Vibrex Master 2 (35 sm x 50 sm) — 91 UAH

Vibro-isolation Vibrex Master 3 (35 sm x 50 sm) — 107 UAH

Vibro-isolation ACOUSTICS Electro 3.5 (70 sm x 50 sm) — 441 UAH

Vibro-isolation ACOUSTICS Electro 2.5 (70 sm x 50 sm) — 217 UAH

Vibro-isolation ACOUSTICS Electro 1.5 (70 sm x 50 sm) — 277 UAH

Vibro-isolation Vibrex Red Label - Premium Line 2 (35 sm x 50 sm) — 199 UAH

Vibro-isolation Vibrex Black Label - Business Line 4 (50 sm x 70 sm) — 446 UAH

Minimum price - 84 UAH

Average price - 339 UAH

Maximum price - 1 742 UAH