Noise-isolation

Car noise insulation is the process of installing special materials to reduce interior noise levels, improve acoustics and driving comfort.

Noise insulation reduces external noises, makes the ride more comfortable and quieter, and improves the sound quality of the audio system.

For noise insulation, vibration isolators, noise absorbing materials, thermal insulation coatings and sound absorbing elements are used.

The choice depends on the type of noise to be eliminated and the area of the vehicle. It is recommended to choose materials from reputable manufacturers and consult with professionals.

Yes, noise insulation can be done on your own, but for the best results it is better to contact professionals.

First of all, the doors, floor, trunk, wheel arches and roof are soundproofed.

The time depends on the scope of work and the car model. On average, full noise insulation takes from one to three days.

Noise insulation improves acoustics, reduces driver and passenger fatigue, and increases cabin comfort.

There is full and partial noise insulation. Full soundproofing involves treating all major areas, while partial soundproofing involves treating only certain parts, such as doors or the floor.

Quality materials last up to 10 years or more if properly installed and used.

Noise insulation significantly improves the sound quality of the audio system by eliminating extraneous noises and vibrations.

Soundproofing helps keep the interior warm by reducing cold air infiltration and improving insulation.

Noise absorbing materials absorb sound waves, reducing their reflection and propagation. They are used to treat the roof, doors and interior.

For doors, 2-3 mm thick vibration isolators and 5-8 mm thick noise absorbing materials such as bituminous mats and acoustic foam are suitable.

For floors, dense 3-4 mm thick vibration isolators and 10-15 mm thick noise-absorbing materials such as butyl mats and multi-layer coverings are recommended.

Lightweight vibration isolators with a thickness of 2 mm and noise absorbing materials with a thickness of 5-10 mm, such as acoustic foam and polyethylene foam, are suitable for the roof.

For wheel arches use materials resistant to moisture and dirt with a thickness of 4-6 mm, such as vibroplasts and noise-absorbing mats.

Dense 3-4 mm thick vibration isolators and 10-15 mm thick sound absorbing materials such as bituminous mats and acoustic mats are suitable for the trunk.

For engine noise insulation, heat and noise absorbing materials with a thickness of 10-15 mm, such as polyurethane foam coatings, are used.

For the hood, 8-10 mm thick thermal insulation materials are used, which also have noise-absorbing properties.

Thin sound absorbing materials with a thickness of 5-8 mm, such as acoustic foam and polyethylene foam, are suitable for the torpedo.

For the ceiling, lightweight 2 mm thick vibration isolators and 5-10 mm thick noise-absorbing materials such as acoustic foam and foil mats are used.

Select materials according to their thickness and the type of noise to be eliminated. It is recommended to use multi-layer combinations of vibration and noise absorbing materials to maximize the effect.

Noise-isolation ACOUSTICS SoundWave 15 — 392 UAH

Noise-isolation ACOUSTICS SOFT VAR F 6 — 180 UAH

Noise-isolation ACOUSTICS Splen 8 — 217 UAH

Noise-isolation ACOUSTICS SoundWave 35 — 588 UAH

Noise-isolation ACOUSTICS Faton Caiman 12 — 128 UAH

Noise-isolation ACOUSTICS SoundWave 35 — 588 UAH

Noise-isolation Audio System SW Foam Wave 15 Black PU — 462 UAH

Noise-isolation Audio System SW Foam Wave 15 — 399 UAH

Noise-isolation Vibrex Wave Comfort Plus (50 sm x 70 sm) — 399 UAH

Noise-isolation ACOUSTICS SoundWave 15 — 392 UAH

Noise-isolation ACOUSTICS Faton Caiman 5 — 83 UAH

Sealing tape Ultimate Antisqueak — 95 UAH

Noise-isolation ACOUSTICS Faton Caiman 8 — 101 UAH

Noise-isolation ACOUSTICS Splen nx 4 — 112 UAH

Sealing tape ACOUSTICS Antiscrip 6 — 120 UAH

Sealing tape Ultimate Antisqueak — 95 UAH

Sealing tape Vibrex Antiskryp 25 mm x 6 m — 158 UAH

Noise-isolation Vibrex Wave Comfort Plus (50 sm x 70 sm) — 399 UAH

Noise-isolation Vibrex Wave Comfort (50 sm x 70 sm) — 347 UAH

Noise-isolation Vibrex SPLEN 8 (50 sm x 70 sm) — 149 UAH

Noise-isolation Vibrex SPLEN 4 (50 sm x 70 sm) — 132 UAH

Minimum price - 83 UAH

Average price - 220 UAH

Maximum price - 588 UAH