Car amplifier Alpine PDX-V9

Description car amplifier Alpine PDX-V9

Excellent class D sound amplifier, this model has excellent technical characteristics and provides very clear and powerful sound. The configuration of the channels in this model: 4-channel (Stereo) + 1-channel (Mono).

Amplifiers in this series have an improved design, making them more reliable and efficient. The system minimizes background noise, and through the use of ultra-low impedance at the output of the PDX series, it produces a well-controlled, dense bass-all this makes the sound quality almost perfect.

Ultra-wide amplitude-frequency response

The amplifier is distinguished by its ultra-wide frequency response, which is not This allows you to get great quality and accuracy of sound transmission. Such a device can satisfy the requirements of any audiophile.

Small harmonic distortion (OIG) at high frequencies

This amplifier can operate over a very wide frequency range. It is worth noting that at the high frequencies, the OIG is reduced, which guarantees clear and clear playback. Since the ear is maximally sensitive to interference on these frequencies, you will be able to enjoy high-quality music without distortion when installing this amplifier.

Maximum Power

This unit has a power supply with a large power reserve. All car amplifiers of the PDX series from Alpine are distinguished by the high efficiency of the system 80 80% (at the same time, the efficiency of the power source is not less than 90%, but the output stage is>90%).

New Thermal Control System

This model is equipped with an improved thermal control system, in which uses a special processor designed to clearly control the parameters and the state of the device. If the temperature rises sharply and the becomes critically large, then the output power reduction mode is activated. As soon as the temperature returns to normal, the power gradually rises to the normal level. The use of this technology ensures uninterrupted operation of the device in for a long time without sudden shutdowns and failures.

Specify the actual power in the accompanying documents

Each amplifier has a unique personal certificate, the which contains all of its parameters and data on the passage of specialized testing. this certificate contains real power parameters that were defined in moment of passing the tests.

Small height and convenient docking

The body of this amplifier is 20% thinner than its predecessors, its height is 5 see. A thanks to improvements in the docking system, the connection is closer, there is no no gaps and gaps, which saves space in the trunk. Also worth noting is an improved heat sink system.

Speaker Connectors

This model uses ultra-high-power connectors to connect speakers, which include the use of a cable with a cross section of up to 10 mm sup. The special design of the connectors contributes to the fastest possible connection of acoustic equipment to the amplifier.

Special power connector

The connector for connecting the power wires is removable, it provides for minimal losses and can pass a large current. Use of cables up to 25 mm is allowed. This greatly simplifies the installation and connection of the amplifier without energy loss.

Remote bass control (optional)

Amplifiers of this series can be supplemented with a special compact regulator RUX-KNOB (not included in the package of delivery, purchased separately). This will allow you to quickly control the device directly from the dashboard. The regulator can work with several amplifiers at once.

Special decorative frame

There is a special removable decorative frame that will allow you to show your individuality. It can be painted in any color so that it fits into the interior as much as possible, or, on the contrary, stands out against the general background. You can choose your own version.

Technical Parameters:

— Total maximum power: 1600 W.

— Per channel for 4 ohms: (at 14.4 V ? 1% KGI + noise): 100 W RMS x 4 + 500 W RMS x 1.

— To a channel of 2 ohms: (at 14.4 V le 1% KGI + noise): 100 W RMS x 4 + 500 W RMS x 1.

— Bridge wiring on 4 Ohms: (? 1% KGI + noise): 200 W RMS x 2.

— Crossover: adjustable, 30-600 Hz (-12 dB/oct), choice: LPF/HPF/Off.

— Crossover (Subwoofer): 50  -600 Hz, -24 dB/Oct.

— Sabsonik filter: 3  -30 Hz, -24 dB/oct.

— Power: 14.4 volts post. (from 11 Volts to 16 Volts).

— Signal/Noise Ratio (4 ohms) for Kan-1/2/3/4: 112 dB.

— Signal/Noise Ratio (4 ohms) for a subwoofer channel: 119 dB.

— Weight: 2.7 kg.

— Case Size (WxHxD) mm: 257 mm x 192 mm x 50.8 mm.