Car amplifier Alpine R-A60F

Description car amplifier Alpine R-A60F

The Alpine R-A60F Car Audio Amplifier is a state-of-the-art four-channel amplifier with excellent performance. Alpine offers brand new R-Series amplifiers that blend perfectly with the R-Series speakers. They are highly resistant to heat and will not shut off due to overheating. The new four-channel amplifier boasts an impressive power of 1200 watts, and besides that it complies with Hi-Res Audio standards.

   

  

Original digital design

  

Compact and powerful: The new digital gain circuitry provides high output power while maintaining the small size of the amplifier — just 274 mm wide and 223 mm long. This model is easy to install on virtually any vehicle.

 

   

  

Thermal protection

  

Along with an improved intelligent platform, the new R-series amplifiers have an improved heatsink design and a protective circuit that eliminates thermal shutdown, which significantly increases the reliability of the device.

 

   

  

Easy connection of acoustic equipment

Connectors for speakers and a power cable are conveniently located on the left side of the amplifier, which makes installation as quick and easy as possible. With it, you can organize a circuit with channel-by-channel amplification without a processor. That is, the sound quality will improve even if a passive crossover is removed from the system. It also helps protect against phase change and power loss.

 

   

  

Inputs for connecting woofers/tweeters

 

The RCA line inputs in this 4-channel amplifier allow you to connect high and low frequency speakers. This makes it easy to connect the R-A60F directly to the original car stereo, regardless of the power output of your head unit (RCA connectors with open cable outlets are available separately).

 

   

  

Subwoofer control

You can connect the RUX-KNOB2 remote bass control to the amplifier (not included, sold separately) to control the subwoofer level directly from the dashboard (can be used for channel 3 + 4 in bridge mode for the subwoofer).

 

   

  

Hi-Res Audio Compatibility

The amplifiers in this series use the innovative Alpine platform, based on the Class-D amplification scheme. Double feedback is added to it, which is connected after the output filter. This ensures that the result is very accurate and controlled sound. This technology ensures the amplifier is compatible with the high requirements of Hi-Res Audio.

 

Specifications:

— Power RMS (4 Ohms), W: 4 x 100

— Power RMS (2 Ohms), W: 4 x 150

— Power RMS (4 Ohm/bridge), W: 2 x 300

— Crossover: adjustable high-pass/low-pass filter: 50-400 Hz (-12 dB/oct)

— Crossover: adjustable HPF-V: 400 Hz-6 kHz

— Power: 14.4 VDC (9V to 16V)

— Input sensitivity (RCA input): Hi: 0.5 V-10 V/Low: 0.2 V-4.0 V

— High-level login with automatic inclusion

— Cable diameter: power-AWG 4, speaker-AWG 8

— Frequency response (+ 0/-3 dB: 1 W at 4 Ohms): 10 Hz-45 kHz

— THD + noise (at 10 W at 4 Ohms):0.03%

— Damping Factor:>500

— Weight: 3.2 kg

— Radiator (WxHxD) mm: 273 x 50.8 x 200

— With attached brackets (WxHxD) mm: 273 x 50.8 x 223